- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
1.5inch.1.875inch 2.5inch 3.5inch
Ruixin
Adjustable type Wire Retreaver
Alloy Steel&Nickel Alloy
China Baoji
Wireline & Slickline
Standard
Adjustable type Wire Retreaver is used to find and salvage single or multi-strand steel wires that have been cut or broken
Size | Fishing neck | Connection |
1.5＂ | 1.375＂ | 15/16"-10UN |
1.875＂ | 1.375＂ | 15/16"-10UN |
2.5＂ | 1.375＂ | 15/16"-10UN |
3.5＂ | 1.375＂ | 15/16"-10UN |
Note: Special specifications can be provided according to customer requirements.
The Adjustable type Wire Retreaver can adjust the searching range according to the requirements. The finder barrel is mainly used to determine the broken position of the steel wire and make it into a ball. Some broken steel wires will run into the gap between the finder barrel and the taper sleeve. At this time, when the joint is pulled up, the broken steel wire will be caught in the gap between the taper sleeve and the barrel, and the contact surface between the barrel and the taper sleeve is made into a cone to help tighten the steel wire. The conical surface in front of the sleeve plays a guiding role in the process of running in the well.
1. The Adjustable type Wire Retreaver is connected to the bottom of the basic tool string and goes into the well;
2. When not in use for the time being, grease the thread and place it with thread protector.
Adjustable type Wire Retreaver is used to find and salvage single or multi-strand steel wires that have been cut or broken
Size | Fishing neck | Connection |
1.5＂ | 1.375＂ | 15/16"-10UN |
1.875＂ | 1.375＂ | 15/16"-10UN |
2.5＂ | 1.375＂ | 15/16"-10UN |
3.5＂ | 1.375＂ | 15/16"-10UN |
Note: Special specifications can be provided according to customer requirements.
The Adjustable type Wire Retreaver can adjust the searching range according to the requirements. The finder barrel is mainly used to determine the broken position of the steel wire and make it into a ball. Some broken steel wires will run into the gap between the finder barrel and the taper sleeve. At this time, when the joint is pulled up, the broken steel wire will be caught in the gap between the taper sleeve and the barrel, and the contact surface between the barrel and the taper sleeve is made into a cone to help tighten the steel wire. The conical surface in front of the sleeve plays a guiding role in the process of running in the well.
1. The Adjustable type Wire Retreaver is connected to the bottom of the basic tool string and goes into the well;
2. When not in use for the time being, grease the thread and place it with thread protector.
