A R type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing neck with special fishing claw and move upward to release the claw, and which is divided into three types: RB, RS and RJ.
Size | Actual OD | Fishing neck | Connection | Grasping diameter |
1.5" | 1.43" | 1.187" | 15/16-10UN | 1.187" |
2" | 1.77" | 1.375" | 15/16-10UN | 1.375" |
2.5" | 2.18" | 1.375" | 15/16-10UN | 1.75" |
3" | 2.74" | 2.313" | 1-1/16-10UN | 2.313" |
4" | 3.718" | 2.313" | 1-1/16-10UN | 3.125" |
Note. Pay attention to the model of grasping distance when ordering goods, More customized parts are available upon request.
After pulling out the tool, use a releasing tool to stick in the releasing position, unclench the fishing claw to splay, and then the tool fished is released.
1. Before lowering the tool, inspect whether the connection threads of the tool are loose.
2. Maintain it in time after use.