- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
1.5inch
Ruixin
CT External Slip Connector Tool
Alloy Steel&Nickel Alloy
China Baoji
Wireline Operation And Slickline Operation
Standard
The CT external slip connector tool is used to connect coiled tubing with coiled tubing operation tools. It is the uppermost tool in coiled tubing operation.
1. coiled tubing specification: 1.5 ";
2. Breakthrough pressure: 35Mpa；;
3. Fishing neck: 2 ";
4. Safety load: 200KN.
1. When running in the well, the upper end of the tool is connected with coiled tubing, and the lower end is connected with coiled tubing tool.
2. When connecting coiled tubing, be sure to ensure that the sealing ring is not damaged, and ensure that the slips lock the coiled tubing.
3. After the coiled tubing is connected, tighten the jacking wires everywhere, and test the pressure from the lower end to check the tightness.
4. After the test, check all the places, and plug the pressure test port with jacking wire to prepare for downhole operation.
1. Before use, measure the outer diameter of coiled tubing. The tool is applicable to coiled tubing with a specification of 1.5 ",so the outer diameter of coiled tubing must be within the range of φ Φ38.1±0.25mm If it is out of tolerance, the outer diameter of coiled tubing must be ground within the above standard size;
2. Check the straightness of coiled tubing at the same time. The straightness of coiled tubing is ≤1mm/1m. If it is bent, it cannot be used, and the straight end must be re-cut for use;
3. After cutting the coiled tubing, it is necessary to ensure that the cutting end is flush, and the chamfer can be used only after grinding with a file to prevent the coiled tubing from cutting the sealing ring;
4. Make sure there is no leakage in the pressure seal test before use;
5. When temporarily not in use, apply lubricating oil to the seal, and put the thread belt thread protector away.
The CT external slip connector tool is used to connect coiled tubing with coiled tubing operation tools. It is the uppermost tool in coiled tubing operation.
1. coiled tubing specification: 1.5 ";
2. Breakthrough pressure: 35Mpa；;
3. Fishing neck: 2 ";
4. Safety load: 200KN.
1. When running in the well, the upper end of the tool is connected with coiled tubing, and the lower end is connected with coiled tubing tool.
2. When connecting coiled tubing, be sure to ensure that the sealing ring is not damaged, and ensure that the slips lock the coiled tubing.
3. After the coiled tubing is connected, tighten the jacking wires everywhere, and test the pressure from the lower end to check the tightness.
4. After the test, check all the places, and plug the pressure test port with jacking wire to prepare for downhole operation.
1. Before use, measure the outer diameter of coiled tubing. The tool is applicable to coiled tubing with a specification of 1.5 ",so the outer diameter of coiled tubing must be within the range of φ Φ38.1±0.25mm If it is out of tolerance, the outer diameter of coiled tubing must be ground within the above standard size;
2. Check the straightness of coiled tubing at the same time. The straightness of coiled tubing is ≤1mm/1m. If it is bent, it cannot be used, and the straight end must be re-cut for use;
3. After cutting the coiled tubing, it is necessary to ensure that the cutting end is flush, and the chamfer can be used only after grinding with a file to prevent the coiled tubing from cutting the sealing ring;
4. Make sure there is no leakage in the pressure seal test before use;
5. When temporarily not in use, apply lubricating oil to the seal, and put the thread belt thread protector away.
