+86-13571793445       selina@rxwirelinetools.com
You are here: Home » Coiled Tubing Tools » CT Flow Activated GS Running Tool

loading

Share to:

CT Flow Activated GS Running Tool

The CT Flow Activated GS Running Tool is a tool for casting and fishing the inner salvage neck. It can rely on the pressure generated by the throttling of the overcurrent stroke inside the coiled tubing to release the jam, so as to achieve the purpose of losing hands at the bottom of the well.
Availability:
  • 2inch - 3.5inch
  • Ruixin
  • CT Flow Activated GS Running Tool
  • Alloy Steel&Nickel Alloy
  • China Baoji
  • Wireline & Slickline
  • Standard

CT Flow Activated GS Running Tool Manufacturer - Ruixin

The CT Flow Activated GS Running Tool is a tool for casting and fishing the inner salvage neck. It can rely on the pressure generated by the throttling of the overcurrent stroke inside the coiled tubing to release the jam, so as to achieve the purpose of losing hands at the bottom of the well. 

CT Flow Activated GS Running Tool Introduction

Commonly used for casting and salvaging lock cylinders, packers and bridge plugs with an internal salvage neck.

CT Flow Activated GS Running Tool Technical parameters of common specifications


Szie

Fishing neck

Connection

2″

1.375″

15/16″-10UN

2.5″

1.375″

15/16″-10UN

3″

1.75″

1-1/16″-10UN

3.5″

2.313″

1-1/16″-10UN

Technical parameters can also be according to user requirements


CT Flow Activated GS Running Tool Structural characteristics

CT Flow Activated GS Running Tool is mainly composed of upper joint, mandrel, spring, outer cylinder, piston, fishing claw, sleeve and guide cone.

CT Flow Activated GS Running Tool Maintenance

1. After the tool is disassembled, the damage of each part should be checked, and the damaged parts should be replaced.

2. When assembling, a thin layer of grease should be applied to the thread surface and the O-ring sealing surface.


Previous: 
Next: