CT Flow Activated Heavy Duty Pulling Tool

Coiled Tubing Downhole Tools Manufacturer - Ruixin

The CT Flow Activated Heavy Duty Pulling Tool is a kind of fishing tool used to fish tools or instruments with external fishing necks .

CT Tools specifications and technical parameters

1. Specification and model: 2.25 ";

2. compressive strength: 35MPa；;

3. tensile strength: 100KN；;

4. Operation mode: hydraulic;

5. Connecting thread: 1-1/2 "AMMT.

Technical parameters can also be according to user requirements

Heavy duty equipment tools structural characteristics

The CT Flow Activated Heavy Duty Pulling Tool consists of an upper joint, a mandrel, a connector and an outer cylinder.

The upper joint is used to connect to the lower part of the coiled tubing tool; There is an internal thread in the depth of the inner hole at the lower end, which is connected to the mandrel to form the bearing body of the fishing tool.

The outer cylinder and the fishing claw are the key components of the fishing tool, and the fishing claw is in the contracted position under the action of the spring; When the tool to be fished enters the outer cylinder, the fishing claw goes up, so that the fishing claw opens outward to catch the fishing neck of the tool.

CT Flow Activated Heavy Duty Pulling Tool matters needing attention

1. Before running in the well, know whether there is enough space in the inner diameter of the pipe string for releasing the fishing claw in the well; If necessary, access can be made first;

2. After each use, check whether the O-ring is damaged and replace it in time.