- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
2.313inch - 3.813inch
Ruixin
D-2 Shifting Tools
Alloy Steel&Nickel Alloy
China Baoji
Wireline & Slickline
Standard
D-2 Shifting Tool is a special tool for opening and closing BAKER-L type sliding sleeve.
Size | Fishing | Connection |
2.313＂ | 1.75＂ | 15/16-10UN |
2.813＂ | 2.313＂ | 1-1/16-10UN |
3.813＂ | 2.313＂ | 1-9/16-10UN |
The D-2 Shifting Tool is mainly composed of an upper joint, a mandrel, a positioning sleeve, a short joint, a cylinder, a retaining ring, a main spring, a sleeve, a positioning key spring, a positioning key, a lower joint and a protective cap.
TheD-2 Shifting Tools requires a specific distance from the square face of the shifting dog to the collet locating profile. This measurement is done with the tool in the retracted position and allows for the shifting tool to disengage the sleeve when the shifting sequence is complete.Although the shifting tool can be deliberately released three steel shear pins are incorporated at the base of the shifting dogs allowing for a safety release feature.
1. After the tool is disassembled, the damage of each part should be checked, and the damaged parts should be replaced.
2. When assembling, a thin layer of grease should be applied to the thread surface.
D-2 Shifting Tool is a special tool for opening and closing BAKER-L type sliding sleeve.
Size | Fishing | Connection |
2.313＂ | 1.75＂ | 15/16-10UN |
2.813＂ | 2.313＂ | 1-1/16-10UN |
3.813＂ | 2.313＂ | 1-9/16-10UN |
The D-2 Shifting Tool is mainly composed of an upper joint, a mandrel, a positioning sleeve, a short joint, a cylinder, a retaining ring, a main spring, a sleeve, a positioning key spring, a positioning key, a lower joint and a protective cap.
TheD-2 Shifting Tools requires a specific distance from the square face of the shifting dog to the collet locating profile. This measurement is done with the tool in the retracted position and allows for the shifting tool to disengage the sleeve when the shifting sequence is complete.Although the shifting tool can be deliberately released three steel shear pins are incorporated at the base of the shifting dogs allowing for a safety release feature.
1. After the tool is disassembled, the damage of each part should be checked, and the damaged parts should be replaced.
2. When assembling, a thin layer of grease should be applied to the thread surface.
