+86-13571793445       selina@rxwirelinetools.com
You are here: Home » Products » Running & Pulling Tools » GU Adaptor

loading

Share to:

GU Adaptor

The GU Adapter is used in conjunction with a GS type Pulling Tool to convert the shear direction from shear down to shear up. When connected to the GS, the tool becomes what is commonly referred to as a GR Pulling Tool.
Availability:
  • 2inch 2.5inch 3inch 3.5inch 4inch

  • Ruixin

  • GU Adaptor

  • Alloy Steel&Nickel Alloy

  • China Baoji

  • Wireline & Slickline

  • Standard

GU Adaptor Manufacturer - Ruixin

The GU Adapter is used in conjunction with a GS type Pulling Tool to convert the shear direction from shear down to shear up. When connected to the GS, the tool becomes what is commonly referred to as a GR Pulling Tool.

GU Adaptor Technical parameters of common specifications

Size

Actual OD

Fishing neck

Connection

2″

1.81″

1.375″

15/16″-10UN

2-1/2″

2.25″

1.375″

15/16″-10UN

3″

2.72″

2.313″

1-1/16″-10UN

3-1/2″

3.11″

2.313″

1-1/16″-10UN

4″

3.62″

2.313″

1-1/16″-10UN

Note:Technical parameters can also be according to user requirements

GU  Adaptor Structural characteristics

GU Adaptor is Upward jarring will shear a pin to allow the release and recovery of the GR to surface. The GU Adapter incorporates the unique Arm-Align® feature for integral re-arming and shear pin alignment, eliminating the requirement to fully disassemble between runs.

GU  Adaptor Maintenance

1. After the tool is disassembled, check the damage of each component and replace the damaged parts.

2. When assembling, apply a thin layer of grease on the thread surface.

3. After assembly, the fishing neck is attached with thread protector and marked for later use.





Previous: 
Next: