1.5inch 2inch 2.5inch 3inch 4inch
Ruixin
RB Pulling Tool
Alloy Steel&Nickel Alloy
China Baoji
Wireline Operation And Slickline Operation
Standard
A R type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing neck with special fishing claw and move upward to release the claw, and which is divided into three types: RB, RS and RJ.
Size | Actual OD | Fishing neck | Connection |
1.5" | 1.43" | 1.187" | 15/16-10UN |
2" | 1.77" | 1.375" | 15/16-10UN |
2.5" | 2.18" | 1.375" | 15/16-10UN |
3" | 2.74" | 2.313" | 1-1/16-10UN |
4" | 3.718" | 2.313" | 1-1/16-10UN |
Note. More customized parts are available upon request.
1. Use the tool for installing shear pins to screw in the thread of the bottom hole of the mandrel to release the strength of outer cylinder and mandrel.
2. Punch out the shear pin with a punch.
3. Screw off the set screw of upper contact.
4. Use a vice to clamp the upper contact, and use a special wrench to stick in the end groove of mandrel, and take down the mandrel.
5. Take down the sleeve, main spring and shear pin sheath successively.
6. Use a releasing tool to stick in the groove between the fishing claw and the outer cylinder, and withdraw the mandrel.
7. Take out the fishing claw, spring seat and secondary spring successively.
1. Before lowering the tool, inspect whether the connection threads of the tool are loose.
2. Maintain it in time after use.
A R type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing neck with special fishing claw and move upward to release the claw, and which is divided into three types: RB, RS and RJ.
Size | Actual OD | Fishing neck | Connection |
1.5" | 1.43" | 1.187" | 15/16-10UN |
2" | 1.77" | 1.375" | 15/16-10UN |
2.5" | 2.18" | 1.375" | 15/16-10UN |
3" | 2.74" | 2.313" | 1-1/16-10UN |
4" | 3.718" | 2.313" | 1-1/16-10UN |
Note. More customized parts are available upon request.
1. Use the tool for installing shear pins to screw in the thread of the bottom hole of the mandrel to release the strength of outer cylinder and mandrel.
2. Punch out the shear pin with a punch.
3. Screw off the set screw of upper contact.
4. Use a vice to clamp the upper contact, and use a special wrench to stick in the end groove of mandrel, and take down the mandrel.
5. Take down the sleeve, main spring and shear pin sheath successively.
6. Use a releasing tool to stick in the groove between the fishing claw and the outer cylinder, and withdraw the mandrel.
7. Take out the fishing claw, spring seat and secondary spring successively.
1. Before lowering the tool, inspect whether the connection threads of the tool are loose.
2. Maintain it in time after use.