- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
An S type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing neck with special fishing claw and move upward to release the claw, and which is divided into three types: SB, SM and SS.
Size | Actual OD | Fishing neck | Connection | Grasping diameter |
1.25＂ | 1.22＂ | 1＂ | 5/8-11UN | 1＂ |
1.5＂ | 1.437＂ | 1.187＂ | 15/16-10UN | 1.187＂ |
2＂ | 1.77＂ | 1.375＂ | 15/16-10UN | 1.375＂ |
2.5＂ | 2.18＂ | 1.375＂ | 15/16-10UN | 1.75＂ |
3＂ | 2.84＂ | 2.313＂ | 1-1/16-10UN | 2.313＂ |
4＂ | 3.67＂ | 2.313＂ | 1-1/16-10UN | 3.125＂ |
More customized parts are available upon request.
1. Put the secondary spring and spring seat (or sheath) in the outer cylinder successively.
2. Press the spring seat with a screwdriver or long and thin iron rod and put the fishing claw in the groove of outer cylinder.
3. Enclose the mandrel.
4. Put the main spring and pressing cap in the outer cylinder successively.
5. Rotate the mandrel to align the hole of the mandrel close to the big end with the outer cylinder hole, and then insert a thin iron rod.
6. Use a special wrench to screw up the pressing cap in the end groove of the pressing cap.
7. Install the sheath and screw on the upper contact.
8. Fit on the shear pin with the tool for fitting on shear pins.
1. Before lowering the tool, inspect whether the connection threads of the tool are loose.
2. Maintain it in time after use.
An S type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing neck with special fishing claw and move upward to release the claw, and which is divided into three types: SB, SM and SS.
Size | Actual OD | Fishing neck | Connection | Grasping diameter |
1.25＂ | 1.22＂ | 1＂ | 5/8-11UN | 1＂ |
1.5＂ | 1.437＂ | 1.187＂ | 15/16-10UN | 1.187＂ |
2＂ | 1.77＂ | 1.375＂ | 15/16-10UN | 1.375＂ |
2.5＂ | 2.18＂ | 1.375＂ | 15/16-10UN | 1.75＂ |
3＂ | 2.84＂ | 2.313＂ | 1-1/16-10UN | 2.313＂ |
4＂ | 3.67＂ | 2.313＂ | 1-1/16-10UN | 3.125＂ |
More customized parts are available upon request.
1. Put the secondary spring and spring seat (or sheath) in the outer cylinder successively.
2. Press the spring seat with a screwdriver or long and thin iron rod and put the fishing claw in the groove of outer cylinder.
3. Enclose the mandrel.
4. Put the main spring and pressing cap in the outer cylinder successively.
5. Rotate the mandrel to align the hole of the mandrel close to the big end with the outer cylinder hole, and then insert a thin iron rod.
6. Use a special wrench to screw up the pressing cap in the end groove of the pressing cap.
7. Install the sheath and screw on the upper contact.
8. Fit on the shear pin with the tool for fitting on shear pins.
1. Before lowering the tool, inspect whether the connection threads of the tool are loose.
2. Maintain it in time after use.
