- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
FD6.3-35、FD7.0-35
Ruixin
Tool Trap Wireline
Alloy Steel&Nickel Alloy
China Baoji
Wireline Operation And Slickline Operation
Standard
Tool Trap Wireline, also known as the next catcher. It is a safety device to prevent the tool string from accidentally falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve.
Number | Specification | Pressure rating |
1 | 2＂ | 35MPa, 70 MPa |
2 | 2.5＂ | 35MPa, 70 MPa |
3 | 3＂ | 35MPa, 70 MPa |
4 | 3.5＂ | 35MPa, 70 MPa |
5 | 4＂ | 35MPa, 70 MPa |
Note: The specifications not listed in the above table can be provided according to customer needs
When working, the steel wire or cable passes through the slot in the middle of the fork of the anti-dropping device. When the tool string is lifted into the anti-dropping device, the shift fork is lifted into an upright position.
1. Do product test every time before going to the well;
2. After each use,
(1). Check whether the o-ring is damaged and replace it in time;
(2). Check whether the manual fork is flexible;
3. When not in use temporarily, you should bring the protective wire for storage.
Tool Trap Wireline, also known as the next catcher. It is a safety device to prevent the tool string from accidentally falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve.
Number | Specification | Pressure rating |
1 | 2＂ | 35MPa, 70 MPa |
2 | 2.5＂ | 35MPa, 70 MPa |
3 | 3＂ | 35MPa, 70 MPa |
4 | 3.5＂ | 35MPa, 70 MPa |
5 | 4＂ | 35MPa, 70 MPa |
Note: The specifications not listed in the above table can be provided according to customer needs
When working, the steel wire or cable passes through the slot in the middle of the fork of the anti-dropping device. When the tool string is lifted into the anti-dropping device, the shift fork is lifted into an upright position.
1. Do product test every time before going to the well;
2. After each use,
(1). Check whether the o-ring is damaged and replace it in time;
(2). Check whether the manual fork is flexible;
3. When not in use temporarily, you should bring the protective wire for storage.
