Tubing Perforator

Tubing Perforator Manufacturer - Ruixin

A type tubing perforator (tubing punch) is a mechanical device designed to perforate standard and heavy wall tubing under pressure.

Tubing Perforator Specification

Tubing Perforator Disassembly

1.     Rush out the lower safety release shear pin with the puncher pin;

2.     Jar and cut off the upper shear pin;

3.     Take down the fixed screw of dowel pin and dowel pin successively;

4.     Pull out the body and punch holder assembly;

5.     Take out the catch and the Spring;

6.     Separate the body and the punch holder;

7.     Take down the punch;

8.     Rush out the bushing of punch;

9.     Remove the bottom contactor.

Tubing Perforator Maintenance

1. Frequently smear lubricating grease at the sliding place of the body and the punch holder;  

2. Protection shall be done well for the slipping and punching places on the housing to avoid collision and personal injury.