- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
1.25inch - 3inch
Ruixin
Unlatching Joint Slickline
Alloy Steel&Nickel Alloy
China Baoji
Wireline & Slickline
Standard
The Unlatching Joint Slickline is a tool for dropping downhole instruments. The upper end is connected to the basic tool string, and the lower end is connected to the anti-lifting tool.
When dropping the downhole tool, the lower joint of the hand-disposal tool is connected with the anti blow-up tool. After the drop is successful, the upper joint of the hand-discarded tool and the cylinder are pulled out together; After finishing, the downhole instrument can be pulled out together by salvaging the lower joint of the hand tool.
Size | Fishneck | Connection | PN |
1.25″ | 1.187″ | 15/16-10UN | W*0-*0.*0.*0 |
1.5″ | 1.187″ | 15/16-10UN | W*0-*0.*0.*0 |
1.75″ | 1.375″ | 15/16-10UN | W*0-*0.*0.*0 |
3″ | 2.313″ | 1-1/16-10UN | W*0-*0.*0.*0 |
* Tools Can Be Manufactured To Any Size Required.
The Unlatching Joint Slickline upper end of the upper joint is connected with the tool string, and the lower thread is connected with the cylinder. The lower joint can move up and down in the spiral groove at the lower end of the cylinder under the action of the cylindrical pin of the spring machine, and finally the downhole tool can be dropped. The spring and slider can only release the lower joint.
1.When using, carefully check whether the threaded connection of each part is in good condition and loose, so as to prevent some parts from falling off when going down the well and cause accidents.
2.After disassembly, check the service conditions of the set screws and springs in time, and apply grease everywhere to ensure the normal use of the tools.
3.In the process of running in the well, the speed of running in the well is stable, and strong shock is not allowed;
4.For the borehole that may cause the instrument to be blocked from running down, it is necessary to conduct the drifting operation first.
The Unlatching Joint Slickline is a tool for dropping downhole instruments. The upper end is connected to the basic tool string, and the lower end is connected to the anti-lifting tool.
When dropping the downhole tool, the lower joint of the hand-disposal tool is connected with the anti blow-up tool. After the drop is successful, the upper joint of the hand-discarded tool and the cylinder are pulled out together; After finishing, the downhole instrument can be pulled out together by salvaging the lower joint of the hand tool.
Size | Fishneck | Connection | PN |
1.25″ | 1.187″ | 15/16-10UN | W*0-*0.*0.*0 |
1.5″ | 1.187″ | 15/16-10UN | W*0-*0.*0.*0 |
1.75″ | 1.375″ | 15/16-10UN | W*0-*0.*0.*0 |
3″ | 2.313″ | 1-1/16-10UN | W*0-*0.*0.*0 |
* Tools Can Be Manufactured To Any Size Required.
The Unlatching Joint Slickline upper end of the upper joint is connected with the tool string, and the lower thread is connected with the cylinder. The lower joint can move up and down in the spiral groove at the lower end of the cylinder under the action of the cylindrical pin of the spring machine, and finally the downhole tool can be dropped. The spring and slider can only release the lower joint.
1.When using, carefully check whether the threaded connection of each part is in good condition and loose, so as to prevent some parts from falling off when going down the well and cause accidents.
2.After disassembly, check the service conditions of the set screws and springs in time, and apply grease everywhere to ensure the normal use of the tools.
3.In the process of running in the well, the speed of running in the well is stable, and strong shock is not allowed;
4.For the borehole that may cause the instrument to be blocked from running down, it is necessary to conduct the drifting operation first.
