- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
1.75inch - 4inch
Ruixin
Wire Finder
Alloy Steel&Nickel Alloy
China Baoji
Wireline & Slickline
Standard
Wire finder, also known as detector, The Wire Finder is used during fishing operations to locate and ball–up the top of parted slickline or braided line.is a thin-walled tube with a salvage neck. When salvaging the wire, first lower it into a mass to facilitate smooth fishing.
O D | FN | Connection |
1.75" | 1.187" | 15/16UN |
2" | 1.375" | 15/16UN |
￠51 | 1.375" | 15/16UN |
2.5" | 1.375" | 15/16UN |
3" | 1.75" | 1-1/16UN |
3.5" | 1.75" | 1-1/16UN |
4" | 2.313" | 1-9/16UN |
*Tools Can Be Manufactured To Any Size Required.
The wire finder OD can be altered by simply rotating the adjustable finder skirt over the wire finder. The wire finder is then locked into place at the desired running OD to suit the well geometry. The wire finder design provides extensive options of tool configuration. Interchangeable grab arms can be added and the tool can be run as a wire finder grab to locate and recover the wire in a single run. Incorporating a lead impression block, magnet or centre spear further extends the operating envelope of this unique system.
1.If the resistance is large when entering the wire finder, please do not continue to shake downwards, so as to prevent the wire from accumulating on the upper part of the seeker and causing the tool string to jam.
2.Do not shake when passing through the safety valve, otherwise it may cause the tool claw to break and cause an accident.
3.After use, timely and careful maintenance to extend the service life of the tool.
Wire finder, also known as detector, The Wire Finder is used during fishing operations to locate and ball–up the top of parted slickline or braided line.is a thin-walled tube with a salvage neck. When salvaging the wire, first lower it into a mass to facilitate smooth fishing.
O D | FN | Connection |
1.75" | 1.187" | 15/16UN |
2" | 1.375" | 15/16UN |
￠51 | 1.375" | 15/16UN |
2.5" | 1.375" | 15/16UN |
3" | 1.75" | 1-1/16UN |
3.5" | 1.75" | 1-1/16UN |
4" | 2.313" | 1-9/16UN |
*Tools Can Be Manufactured To Any Size Required.
The wire finder OD can be altered by simply rotating the adjustable finder skirt over the wire finder. The wire finder is then locked into place at the desired running OD to suit the well geometry. The wire finder design provides extensive options of tool configuration. Interchangeable grab arms can be added and the tool can be run as a wire finder grab to locate and recover the wire in a single run. Incorporating a lead impression block, magnet or centre spear further extends the operating envelope of this unique system.
1.If the resistance is large when entering the wire finder, please do not continue to shake downwards, so as to prevent the wire from accumulating on the upper part of the seeker and causing the tool string to jam.
2.Do not shake when passing through the safety valve, otherwise it may cause the tool claw to break and cause an accident.
3.After use, timely and careful maintenance to extend the service life of the tool.
