- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
FG7.6-35
Ruixin
Wireline Lubricator
Alloy Steel&Nickel Alloy
China Baoji
Wireline Operation And Slickline Operation
Standard
Wireline Lubricator is a high-pressure tube with a quick-connect coupling that is used to hold downhole tools in and out of a well under pressure.
The lower part of the blowout Wireline Lubricator is connected to the blowout preventer valve, and the upper part is connected to the blowout preventer box or the grease injection sealing system. The length is generally 8 feet, and there are also 4 feet and 7 feet; during operation, the multi-section blowout preventer combination is selected according to the length of the downhole tool.
The blowout Wireline Lubricator shall be subjected to pressure test regularly, and the test pressure shall be 1.5 times of the working pressure.
1. Install the pressure test connector and connect the pressure test pipeline;
2. Start the pressure test pump for pressure test: press to the test pressure, keep the pressure for 15 minutes without leakage, and fill in the test record card.
1. After each use, the sealing ring must be replaced;
2. When not in use temporarily, you should bring the protective wire for storage.
Wireline Lubricator is a high-pressure tube with a quick-connect coupling that is used to hold downhole tools in and out of a well under pressure.
The lower part of the blowout Wireline Lubricator is connected to the blowout preventer valve, and the upper part is connected to the blowout preventer box or the grease injection sealing system. The length is generally 8 feet, and there are also 4 feet and 7 feet; during operation, the multi-section blowout preventer combination is selected according to the length of the downhole tool.
The blowout Wireline Lubricator shall be subjected to pressure test regularly, and the test pressure shall be 1.5 times of the working pressure.
1. Install the pressure test connector and connect the pressure test pipeline;
2. Start the pressure test pump for pressure test: press to the test pressure, keep the pressure for 15 minutes without leakage, and fill in the test record card.
1. After each use, the sealing ring must be replaced;
2. When not in use temporarily, you should bring the protective wire for storage.
