- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
The Wireline Torsion Tester is also known as the wire torsion tester. It is an instrument used for wire torsion experiments. Through the torsion test, the number of turns when the wire is broken is counted and compared with the standard number of broken turns of the wire to determine the qualitative test. Whether the well wire can continue to be used.
Applicable steel wire diameter: 0.092", 0.108", 0.125"
Total weight: 4.6Kg
Length × width × height (mm): 452.5 × 112 × 76.5
The Wireline Torsion Tester is mainly composed of a shell, an upper cover, an adjusting plate, a spring, a bearing seat, a connecting rod, and a handle. The specific structure is shown in the attached drawings.
The shell supports and connects the components; the upper cover is equipped with a window plate to observe the twisting of the steel wire; the adjustment plate is equipped with a splint and a splint seat to fix one end of the steel wire; the bearing seat is equipped with a splint, shaft and bearing for fixing And rotate the steel wire; the measuring pin is used to easily judge the steel wire specification; the spring is used to straighten the steel wire to pre-tighten; the connecting rod and the handle are used to rotate the shaft to twist the steel wire. According to API9A standard, the minimum number of twisted and broken turns of 0.092" steel wire is about 23 turns, and the minimum number of twisted and broken turns of 0.108" steel wire is about 20 turns.
Grease the bearings regularly.
The Wireline Torsion Tester is also known as the wire torsion tester. It is an instrument used for wire torsion experiments. Through the torsion test, the number of turns when the wire is broken is counted and compared with the standard number of broken turns of the wire to determine the qualitative test. Whether the well wire can continue to be used.
Applicable steel wire diameter: 0.092", 0.108", 0.125"
Total weight: 4.6Kg
Length × width × height (mm): 452.5 × 112 × 76.5
The Wireline Torsion Tester is mainly composed of a shell, an upper cover, an adjusting plate, a spring, a bearing seat, a connecting rod, and a handle. The specific structure is shown in the attached drawings.
The shell supports and connects the components; the upper cover is equipped with a window plate to observe the twisting of the steel wire; the adjustment plate is equipped with a splint and a splint seat to fix one end of the steel wire; the bearing seat is equipped with a splint, shaft and bearing for fixing And rotate the steel wire; the measuring pin is used to easily judge the steel wire specification; the spring is used to straighten the steel wire to pre-tighten; the connecting rod and the handle are used to rotate the shaft to twist the steel wire. According to API9A standard, the minimum number of twisted and broken turns of 0.092" steel wire is about 23 turns, and the minimum number of twisted and broken turns of 0.108" steel wire is about 20 turns.
Grease the bearings regularly.
