- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
1.5inch - 3.313inch
Ruixin
X Running Tool
Alloy Steel&Nickel Alloy
China Baoji
Wireline Operation And Slickline Operation
Standard
X Running Tool is constructed to deploy the flow of subsurface control devices. It is used to run X and XN lock mandrels. The fishing neck is connected to the device to improve the industry standard connections.
Size | Fishing Neck | Connection |
1.5″ | 1.188″ | 15/16″-10UN |
1.875″ | 1.375″ | 15/16″-10UN |
2.875″ | 2.313″ | 1-1/16″-10UN |
3.313″ | 2.313″ | 1-1/16″-10UN |
Note: Any size can be customized according to customer's needs.
The X running tool equalizing assembly consists of three parts:Valve Housing and Equalizing Valve and Valve Cap.
Check the tool to ensure it can move between the selective and non-selective position probably.The assembled tool is under the selective model usually. No gap between fishing neck and spring housing.
If type XN landing nipple is below several type X landing nipple, it is ok to run under the selective model to save the top shear pin when the packing is running through the seal segment of landing nipple during jarring. Move to the non-selective model when it is running in the last type X landing nipple above the type XN landing nipple.
X Running Tool is constructed to deploy the flow of subsurface control devices. It is used to run X and XN lock mandrels. The fishing neck is connected to the device to improve the industry standard connections.
Size | Fishing Neck | Connection |
1.5″ | 1.188″ | 15/16″-10UN |
1.875″ | 1.375″ | 15/16″-10UN |
2.875″ | 2.313″ | 1-1/16″-10UN |
3.313″ | 2.313″ | 1-1/16″-10UN |
Note: Any size can be customized according to customer's needs.
The X running tool equalizing assembly consists of three parts:Valve Housing and Equalizing Valve and Valve Cap.
Check the tool to ensure it can move between the selective and non-selective position probably.The assembled tool is under the selective model usually. No gap between fishing neck and spring housing.
If type XN landing nipple is below several type X landing nipple, it is ok to run under the selective model to save the top shear pin when the packing is running through the seal segment of landing nipple during jarring. Move to the non-selective model when it is running in the last type X landing nipple above the type XN landing nipple.
