The Wire Retriever imay be used when there is a desire to locate and potentially retrieve a broken (parted) slickline or wire. Different size fingered skirts may be interchanged depending on the tubing size.
Size | Fishing | Connection |
1.5" | 1.375" | 15/16UN |
1.875" | 1.75" | 15/16UN |
3" | 1.375" | 15/16UN |
Note: Special specifications can be provided according to customer requirements.
The Wire Retreaver Slickline is composed of an outer cylinder, a mandrel, a seeker cylinder, a retaining ring, a tapered sleeve, a cone, an upper joint and an elastic cylindrical pin, etc.
1. The Wire Retreaver Slickline is connected under the basic tool string to go down the well;
2. When not in use temporarily, apply grease to the thread and place it with a wire protector.