Availability: | |
---|---|
12inch - 20inch
Ruixin
Hydraulic Stuffing Box Accessories
Alloy Steel&Nickel Alloy
China Baoji
Wireline Operation And Slickline Operation
Standard
Hydraulic stuffing box accessories Manufacturer - Ruixin is a surface pressure control equipment using on slickline operation to seal off the wire, and the sealing of the wire according the rubber seal packing. The BOP plunger of the blowout system is used for the sealing of the downhole pressure after the wire break.The seal packing are both available with manual and hydraulic control methods.
Hydraulic stuffing box accessories is used to seal off around moving or stationary solid wireline while performing wireline work under well pressure. Connected to the top section of the Lubricators, to allow the wireline to be guided in its travel; internal packings which seal off pressure and provide lubricant to the wireline; packing nut to control the hydraulic compression of the packing around wireline to minimize leakage; and a blow out plug at the lower section to provide a seal should the wireline break and be blown out of the packing
The Hydraulic stuffing box accessories consist of Sheave staff, body and control hydraulic cylinder. WP.3000psi ,5000psi.10000psi,15000psi.
Sheave Dia. | Work Pressure | Wire Size | Control Method |
12" | 5000PSI~10000 PSI | 0.092" | Manual & Hydraulic |
14" | 5000PSI~15000 PSI | 0.108" | Manual & Hydraulic |
16" | 5000PSI~15000 PSI | 0.125" | Manual & Hydraulic |
20" | 5000PSI~15000 PSI | 0.16" | Manual & Hydraulic |
Note. More customized parts are available upon request.
Wireline tool strings should always be packaged and shipped in accordance with the following guidelines:
Securely package the wireline tool string in an appropriately sized container.
Ensure the container is of sufficient strength to protect the tool string during shipping.
Clearly label the package with the destination address.
Securely attach a shipping label to the package.
Ensure the package is properly sealed to protect the wireline tool string from damage.
1. After each well use, the sealing packing and blowout preventer should be replaced;
2. If the bearing is jammed or abnormal, it must be checked and replaced;
3. When temporarily not in use, it should be stored with silk protector.
Hydraulic stuffing box accessories Manufacturer - Ruixin is a surface pressure control equipment using on slickline operation to seal off the wire, and the sealing of the wire according the rubber seal packing. The BOP plunger of the blowout system is used for the sealing of the downhole pressure after the wire break.The seal packing are both available with manual and hydraulic control methods.
Hydraulic stuffing box accessories is used to seal off around moving or stationary solid wireline while performing wireline work under well pressure. Connected to the top section of the Lubricators, to allow the wireline to be guided in its travel; internal packings which seal off pressure and provide lubricant to the wireline; packing nut to control the hydraulic compression of the packing around wireline to minimize leakage; and a blow out plug at the lower section to provide a seal should the wireline break and be blown out of the packing
The Hydraulic stuffing box accessories consist of Sheave staff, body and control hydraulic cylinder. WP.3000psi ,5000psi.10000psi,15000psi.
Sheave Dia. | Work Pressure | Wire Size | Control Method |
12" | 5000PSI~10000 PSI | 0.092" | Manual & Hydraulic |
14" | 5000PSI~15000 PSI | 0.108" | Manual & Hydraulic |
16" | 5000PSI~15000 PSI | 0.125" | Manual & Hydraulic |
20" | 5000PSI~15000 PSI | 0.16" | Manual & Hydraulic |
Note. More customized parts are available upon request.
Wireline tool strings should always be packaged and shipped in accordance with the following guidelines:
Securely package the wireline tool string in an appropriately sized container.
Ensure the container is of sufficient strength to protect the tool string during shipping.
Clearly label the package with the destination address.
Securely attach a shipping label to the package.
Ensure the package is properly sealed to protect the wireline tool string from damage.
1. After each well use, the sealing packing and blowout preventer should be replaced;
2. If the bearing is jammed or abnormal, it must be checked and replaced;
3. When temporarily not in use, it should be stored with silk protector.