Availability: | |
---|---|
12inch
Ruixin
Slickline Hay Pulley
Cast aluminum
China Baoji
Wireline & Slickline
Standard
The Slickline Hay Pulley is used to pull the wire from the top of the nozzles to the wire roller. This moves the wire or tension point from the apex to the horizontal position.
The Slickline Hay Pulley is used to control and manipulate the direction of the wireline from a horizontal positon to a vertical position en route to the stuffing box from the wireline unit. diameter should be reasonable, too small diameter is easy to make the steel wire fatigue.
Size | Wire range | Safety load | PN |
12inch | 0.092”-0.125” | 2.5t | S0*-0*.0*.00 |
14inch | 0.092”-0.125” | 2.5t | S0*-0*.0*.00 |
16inch | 0.092” - 0.187” | 2.5t - 5t | S0*-0*.0*.00 |
18inch | 0.092” - 0.187” | 2.5t - 5t | S0*-0*.0*.00 |
20inch | 0.092” - 0.187” | 2.5t - 5t | S0*-0*.0*.00 |
Note:More customized parts are available upon request.
1. Before use, check the wear of the anti-hopping block on the lift frame to ensure that the steel wire or cable does not jump out of the wheel groove;
2, when storing, it is strictly prohibited to hit the pulley with heavy objects, so as not to cause deformation;
3, the specification of the ground pulley should be selected according to the diameter of the steel wire or cable, so as to avoid excessive bending of the steel wire or cable and fatigue damage;
4. When the ground pulley is used with the ground bracket, the steel wire can be prevented from being relaxed instantly and the pulley can be hit.
The Slickline Hay Pulley is used to pull the wire from the top of the nozzles to the wire roller. This moves the wire or tension point from the apex to the horizontal position.
The Slickline Hay Pulley is used to control and manipulate the direction of the wireline from a horizontal positon to a vertical position en route to the stuffing box from the wireline unit. diameter should be reasonable, too small diameter is easy to make the steel wire fatigue.
Size | Wire range | Safety load | PN |
12inch | 0.092”-0.125” | 2.5t | S0*-0*.0*.00 |
14inch | 0.092”-0.125” | 2.5t | S0*-0*.0*.00 |
16inch | 0.092” - 0.187” | 2.5t - 5t | S0*-0*.0*.00 |
18inch | 0.092” - 0.187” | 2.5t - 5t | S0*-0*.0*.00 |
20inch | 0.092” - 0.187” | 2.5t - 5t | S0*-0*.0*.00 |
Note:More customized parts are available upon request.
1. Before use, check the wear of the anti-hopping block on the lift frame to ensure that the steel wire or cable does not jump out of the wheel groove;
2, when storing, it is strictly prohibited to hit the pulley with heavy objects, so as not to cause deformation;
3, the specification of the ground pulley should be selected according to the diameter of the steel wire or cable, so as to avoid excessive bending of the steel wire or cable and fatigue damage;
4. When the ground pulley is used with the ground bracket, the steel wire can be prevented from being relaxed instantly and the pulley can be hit.