Availability: | |
---|---|
3FZ16.0-35-Y
Ruixin
Triple Hydraulic Wireline Bop Tool
Cast aluminum
China Baoji
Wireline & Slickline
Standard
The Triple Hydraulic Wireline Bop Tool (Blowout Preventer) is a safety device used in oil and gas wells to prevent the release of gas or liquid from the wellbore. It consists of three hydraulic components: the blowout preventer, the wireline, and the wireline pressure control.
The main function of the Triple Hydraulic BOP is to seal the wellbore and prevent any leakage of gas or liquid. The blowout preventer is designed to withstand high pressure and prevent any blowout during drilling operations. The wireline is connected to the blowout preventer and extends into the wellbore to seal any leaks that may occur. The wireline pressure control is responsible for maintaining the correct pressure in the wellbore to ensure proper sealing and prevent any leakage.
Wireline pressure control is an essential component of the Triple Hydraulic BOP system. It works by monitoring the pressure inside the wellbore and adjusting the hydraulic pressure on the wireline accordingly. This ensures that the wireline remains tightly sealed around the wellbore, preventing any leakage of gas or liquid.
The wireline pressure control system typically consists of a pressure sensor, a controller, and a hydraulic actuator. The pressure sensor monitors the pressure inside the wellbore and sends this information to the controller. The controller then calculates the appropriate hydraulic pressure required to maintain the correct seal on the wireline. The hydraulic actuator is responsible for applying this pressure to the wireline, ensuring that it remains tightly sealed around the wellbore.
In summary, the Triple Hydraulic BOP system is a vital safety device in oil and gas wells that helps prevent the release of gas or liquid from the wellbore. The wireline pressure control component plays a crucial role in maintaining the correct seal on the wellbore and preventing any leakage.
1. Specification model: 3FZ16.0-35-Y
2. Rated working pressure: 35MPa;
3. Strength test pressure: 52.5MPa;
4. Through hole diameter: 160mm ;
5. Operation mode: hydraulic control;
1. Check the inner and outer seals and O-rings of the gate in time, and replace them in time;
2. After each maintenance, a performance test (gate seal test) should be done;
3. Regular strength test and sealing test.
The Triple Hydraulic Wireline Bop Tool (Blowout Preventer) is a safety device used in oil and gas wells to prevent the release of gas or liquid from the wellbore. It consists of three hydraulic components: the blowout preventer, the wireline, and the wireline pressure control.
The main function of the Triple Hydraulic BOP is to seal the wellbore and prevent any leakage of gas or liquid. The blowout preventer is designed to withstand high pressure and prevent any blowout during drilling operations. The wireline is connected to the blowout preventer and extends into the wellbore to seal any leaks that may occur. The wireline pressure control is responsible for maintaining the correct pressure in the wellbore to ensure proper sealing and prevent any leakage.
Wireline pressure control is an essential component of the Triple Hydraulic BOP system. It works by monitoring the pressure inside the wellbore and adjusting the hydraulic pressure on the wireline accordingly. This ensures that the wireline remains tightly sealed around the wellbore, preventing any leakage of gas or liquid.
The wireline pressure control system typically consists of a pressure sensor, a controller, and a hydraulic actuator. The pressure sensor monitors the pressure inside the wellbore and sends this information to the controller. The controller then calculates the appropriate hydraulic pressure required to maintain the correct seal on the wireline. The hydraulic actuator is responsible for applying this pressure to the wireline, ensuring that it remains tightly sealed around the wellbore.
In summary, the Triple Hydraulic BOP system is a vital safety device in oil and gas wells that helps prevent the release of gas or liquid from the wellbore. The wireline pressure control component plays a crucial role in maintaining the correct seal on the wellbore and preventing any leakage.
1. Specification model: 3FZ16.0-35-Y
2. Rated working pressure: 35MPa;
3. Strength test pressure: 52.5MPa;
4. Through hole diameter: 160mm ;
5. Operation mode: hydraulic control;
1. Check the inner and outer seals and O-rings of the gate in time, and replace them in time;
2. After each maintenance, a performance test (gate seal test) should be done;
3. Regular strength test and sealing test.